Armbian MangoPi MQ Pro Test Report

Test Environment

Operating System Information

• Download Link: https://xogium.performanceservers.nl/archive/mangopi-mq/archive/Armbian_23.8.1_Mangopi-mq_jammy_edge_6.1.0-rc3_xfce_desktop.img.xz
• Reference Installation Document: https://mangopi.org/mqpro

Hardware Information

• MangoPi MQ Pro
• Power Adapter
• A microSD card
• A USB to UART Debugger

Installation Steps

Flashing Image

Use xz to decompress the image. Use dd to flash the image to the microSD card.

xz -kd /path/to/Armbian_22.08.0-trunk_Nezha_jammy_current_5.19.0_xfce_desktop.img.xz
sudo dd if=/path/to/Armbian_22.08.0-trunk_Nezha_jammy_current_5.19.0_xfce_desktop.img of=/dev/your_device bs=1M status=progress

Logging into the System

Logging into the system via the serial port.

Default username: root You will set a password on the first login.

Expected Results

The system should boot normally and allow login via the onboard serial port.

Actual Results

The system failed to boot normally due to an error with U-Boot.

Boot Log

U-Boot 2022.07-rc3-35470-gafc07cec42-dirty (Jun 26 2022 - 13:03:06 +0300)

CPU:   rv64imafdc
Model: Allwinner D1 Nezha
DRAM:  1 GiB
sunxi_set_gate: (CLK#24) unhandled
Core:  66 devices, 24 uclasses, devicetree: board
WDT:   Started watchdog@6011000 with servicing (16s timeout)
MMC:   mmc@4020000: 0, mmc@4021000: 1
Loading Environment from nowhere... OK
In:    serial@2500000
Out:   serial@2500000
Err:   serial@2500000
Net:   
Warning: ethernet@4500000 (eth0) using random MAC address - 96:1a:8a:62:24:8b
eth0: ethernet@4500000
Hit any key to stop autoboot:  0 
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found /boot/extlinux/extlinux.conf
Retrieving file: /boot/extlinux/extlinux.conf
1:      Armbian
Retrieving file: /boot/uInitrd
Retrieving file: /boot/Image
append: root=UUID=89038d48-9eef-4730-94fe-e7fe325e67e2 console=ttyS0,115200n8 console=tty0 earlycon=sbi cma=96M rootflags=data=writeback stmmaceth=chain_mode:1 rw rw no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 splash plymouth.ignore-serial-consoles
Retrieving file: /boot/dtb/allwinner/sun20i-d1-nezha.dtb
Moving Image from 0x40040000 to 0x40200000, end=41ae6000
## Loading init Ramdisk from Legacy Image at 41c00000 ...
   Image Name:   uInitrd
   Image Type:   RISC-V Linux RAMDisk Image (gzip compressed)
   Data Size:    19879135 Bytes = 19 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
ERROR: Did not find a cmdline Flattened Device Tree
Could not find a valid device tree
SCRIPT FAILED: continuing...
No EFI system partition
BootOrder not defined
EFI boot manager: Cannot load any image
starting USB...
Bus usb@4101000: USB EHCI 1.00
Bus usb@4101400: USB OHCI 1.0
Bus usb@4200000: USB EHCI 1.00
Bus usb@4200400: USB OHCI 1.0
scanning bus usb@4101000 for devices... 1 USB Device(s) found
scanning bus usb@4101400 for devices... 1 USB Device(s) found
scanning bus usb@4200000 for devices... 1 USB Device(s) found
scanning bus usb@4200400 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
sun8i_emac_eth_start: Timeout
missing environment variable: pxeuuid
Retrieving file: /boot/extlinux/pxelinux.cfg/01-96-1a-8a-62-24-8b
sun8i_emac_eth_start: Timeout
Retrieving file: /boot/extlinux/pxelinux.cfg/00000000
sun8i_emac_eth_start: Timeout
Retrieving file: /boot/extlinux/pxelinux.cfg/0000000
sun8i_emac_eth_start: Timeout
Retrieving file: /boot/extlinux/pxelinux.cfg/000000
sun8i_emac_eth_start: Timeout
Retrieving file: /boot/extlinux/pxelinux.cfg/00000
sun8i_emac_eth_start: Timeout
Retrieving file: /boot/extlinux/pxelinux.cfg/0000
sun8i_emac_eth_start: Timeout
Retrieving file: /boot/extlinux/pxelinux.cfg/000
sun8i_emac_eth_start: Timeout
Retrieving file: /boot/extlinux/pxelinux.cfg/00
sun8i_emac_eth_start: Timeout
Retrieving file: /boot/extlinux/pxelinux.cfg/0
sun8i_emac_eth_start: Timeout
Retrieving file: /boot/extlinux/pxelinux.cfg/default-riscv-sunxi-sunxi
sun8i_emac_eth_start: Timeout
Retrieving file: /boot/extlinux/pxelinux.cfg/default-riscv-sunxi
sun8i_emac_eth_start: Timeout
Retrieving file: /boot/extlinux/pxelinux.cfg/default-riscv
sun8i_emac_eth_start: Timeout
Retrieving file: /boot/extlinux/pxelinux.cfg/default
sun8i_emac_eth_start: Timeout
Config file not found
sun8i_emac_eth_start: Timeout
sun8i_emac_eth_start: Timeout
=> 

Test Criteria

Successful: The actual result matches the expected result.

Failed: The actual result does not match the expected result.

Test Conclusion

Test failed.