RT-Thread Mangopi MQ Test Report

Test Environment

Operating System Information

• Download Link: https://github.com/RT-Thread/rt-thread
• Reference Installation Document: https://github.com/RT-Thread/rt-thread/blob/master/bsp/allwinner/d1s/README-MQ.md

Hardware Information

• Mangopi MQ
• A microSD card
• A USB to UART Debugger (e.g., CH340, CH341, FT2232, etc.)

Installation Steps

Download Code

Download the RT-Thread code:

git clone https://github.com/RT-Thread/userapps.git
cd userapps
git clone -b rt-smart https://gitee.com/rtthread/rt-thread.git

Configure the toolchain:

python3 get_toolchain.py riscv64
source smart-env.sh riscv64

Compile the kernel:

scons --menuconfig
source ~/.env/env.sh
pkgs --update

Flashing Image

Partition the SD card: Reserve the first 8M of space to accommodate the bootloader:

sudo fdisk /dev/your/device
# in fdisk
o
n
p
1
16384
w

Flash the system onto the SD card:

sudo dd if=boot0_sdcard_sun20iw1p1.bin of=/dev/your/device bs=1024 seek=8
sudo dd if=sd.bin of=/dev/your/device bs=1024 seek=56

Logging into the System

Log into the system via the serial port.

Expected Results

The system should boot up normally, allowing login through the onboard serial port.

Actual Results

CFT

Boot Log

Screen recording (from flashing the image to logging into the system):

Test Criteria

Successful: The actual result matches the expected result.

Failed: The actual result does not match the expected result.

Test Conclusion

CFT