FreeRTOS R128 EVT Development Kit Test Report

Test Environment

Operating System Information

• SDK Link:
  • https://r128.docs.aw-ol.com/r128/get_sdk/
• Precompiled Firmware for Testing: https://www.aw-ol.com/downloads/resources/126
• Reference Installation Document:
  • https://r128.docs.aw-ol.com/devkit/r128_evt/

Hardware Information

• TinyVision Development Board

Installation Steps

Flashing the Image

After downloading the image, use the LiveSuit software to select the image and connect the development board for flashing.

For downloading LiveSuit, see: https://linux-sunxi.org/LiveSuit

LiveSuit

Download and build:

git clone https://github.com/linux-sunxi/sunxi-livesuite.git
apt-get install dkms
make
# If you are getting error that /lib/modules/4.4.50+/build is missing try adding symlink to the /usr/src/linux-headers-XXX, for example:
# sudo ln -s /usr/src/linux-headers-3.6-trunk-rpi/ /lib/modules/4.4.50+/build

cp awusb.ko /lib/modules/`uname -r`/kernel/
depmod -a
modprobe awusb
KERNEL=="aw_efex[0-9]*", MODE="0666"
udevadm control --reload-rules

Run:

./LiveSuit.sh

Logging into the System

Connect UART3 to view the serial output.

Expected Results

The system should boot normally, and the output should be visible through the serial port.

Actual Results

CFT

Boot Log

Screen recording:

Test Criteria

Successful: The actual result matches the expected result.

Failed: The actual result does not match the expected result.

Test Conclusion

CFT