← Back to AWOL Nezha Using
openeuler on AWOL Nezha
System Version
23.03
Status
basic
Last Update
2024-06-21
openEuler RISC-V 23.03 AWOL Nezha D1 Version Test Report
Test Environment
Operating System Information
- System Version: openEuler 23.03 RISC-V preview
- Download Link: Download Link
- Reference Installation Document: Installation Document
Hardware Information
- AWOL Nezha D1
- A USB-A power adapter
- A USB-A to C cable
- A microSD card
- A USB to UART debugger (e.g., CH340, CH341, FT2232, etc.)
- Three Dupont wires
Installation Steps
Using ruyi
CLI to Flash the Image to the microSD Card
Install the ruyi
package manager and run ruyi device provision
, following the prompts.
Logging into the System
Logging to the system via the serial port.
Default username: openeuler
or root
Default password: openEuler12#$
Expected Results
The system should boot normally and allow login via the onboard serial port.
Actual Results
The system booted successfully and login via the onboard serial port was also successful.
Boot Log
openEuler 23.03
Kernel 6.1.0-0.rv64
openeuler-riscv64 login: c3.11.oe2303.riscv64 on an riscv64
openeuler-riscv64 login: root
Password: [ 57.563173] EXT4-fs (mmcblk0p4): resized filesystem to 15498496
Welcome to 6.1.0-0.rc3.11.oe2303.riscv64
System information as of time: Fri Jan 2 08:01:41 CST 1970
System load: 3.42
Processes: 93
Memory used: 6.8%
Swap used: 0.0%
Usage On: 2%
Users online: 1
[root@openeuler-riscv64 ~]# cat /proc/cpuinfo
processor : 0
hart : 0
isa : rv64imafdc
mmu : sv39
uarch : thead,c906
mvendorid : 0x5b7
marchid : 0x0
mimpid : 0x0
[root@openeuler-riscv64 ~]#
Screen recording (From flashing image to login):
Test Criteria
Successful: The actual result matches the expected result.
Failed: The actual result does not match the expected result.
Test Conclusion
Test successful.
Source: Support Matrix