← Back to AWOL Nezha
tina on AWOL Nezha
System Version
20210804
Status
basic
Last Update
2024-06-21
Tina Linux AWOL Nezha D1 Test Report
Test Environment
Operating System Information
- System Version: D1-H Nezha HDMI Test Firmware 20210804
- Download Link:
- Reference Installation Document:
Hardware Information
- AWOL Nezha D1
- USB-A power adapter
- A USB-A to C cable
- A microSD card
- A USB to UART debugger (e.g., CH340, CH341, FT2232, etc.)
- Three Dupont wires
Installation Steps
Flashing Image to microSD Card
Use dd to flash the image to the microSD card.
sudo dd if=D1-H 哪吒 HDMI 测试固件 20210804（开机 HDMI 就有小企鹅启动 logo）.img of=/dev/sdc status=progress Logging into the System
Log into the system via the serial port.
Expected Results
The system should boot normally and allow login via the onboard serial port.
Actual Results
The system booted successfully and login via the onboard serial port was also successful.
Boot Log
BusyBox v1.27.2 () built-in shell (ash)
_____ _ __ _
|_ _||_| ___ _ _ | | |_| ___ _ _ _ _
| | _ | || | | |__ | || || | ||_'_|
| | | || | || _ | |_____||_||_|_||___||_,_|
|_| |_||_|_||_|_| Tina is Based on OpenWrt!
----------------------------------------------
Tina Linux (Neptune, 5C1C9C53)
----------------------------------------------
root@TinaLinux:/# cat /proc/cpuinfo
processor : 0
hart : 0
isa : rv64imafdcvu
mmu : sv39
root@TinaLinux:/# uname -a
Linux TinaLinux 5.4.61 #49 PREEMPT Wed Apr 28 09:23:43 UTC 2021 riscv64 GNU/Linux
root@TinaLinux:/#Screen recording (From flashing image to login):
Test Criteria
Successful: The actual result matches the expected result.
Failed: The actual result does not match the expected result.
Test Conclusion
Test successful.
Source: Support Matrix