Tina Linux D1s NeZha Test Report

Test Environment

Operating System Information

• Link: https://pan.baidu.com/s/1v55AKMFripaEu22tJ92lmw?pwd=awol (Password: awol)
• Reference Installation Document: https://d1s.docs.aw-ol.com/study/study_1tina/

Hardware Information

• D1s NeZha
• A microSD card
• A USB to UART Debugger (e.g., CH340, CH341, FT2232, etc.)

Installation Steps

Packaging the Image

After downloading and extracting, prepare to compile the SDK:

source build/envsetup.sh
lunch
make -j$(nproc)
pack

Flashing the Image

Using the LiveSuit software, select the image and connect the development board to flash it.

For LiveSuit download, see: https://linux-sunxi.org/LiveSuit

LiveSuit

Download and build:

git clone https://github.com/linux-sunxi/sunxi-livesuite.git
apt-get install dkms
make
# If you are getting error that /lib/modules/4.4.50+/build is missing try adding symlink to the /usr/src/linux-headers-XXX, for example:
# sudo ln -s /usr/src/linux-headers-3.6-trunk-rpi/ /lib/modules/4.4.50+/build

cp awusb.ko /lib/modules/`uname -r`/kernel/
depmod -a
modprobe awusb
KERNEL=="aw_efex[0-9]*", MODE="0666"
udevadm control --reload-rules

Run:

./LiveSuit.sh

Logging into the System

Login to the system via the serial port.

Expected Results

The system should boot normally and allow login via the onboard serial port.

Actual Results

CFT

Boot Log

Screen recording (From flashing image to login):

Test Criteria

Successful: The actual result matches the expected result.

Failed: The actual result does not match the expected result.

Test Conclusion

CFT