Tina Linux DongshanPI-Nezha STU Test Report

Test Environment

Operating System Information

• Download Link: Link Password: qcw7
• Reference Installation Document: Link

Hardware Information

• DongshanPI-Nezha STU
• A microSD card
• A USB to UART Debugger (e.g., CH340, CH341, FT2232, etc.)

Installation Steps

Compiling SDK

After downloading, you can find the SDK under DongshanNezhaSTU-TinaV2.0-SDK. Merge and extract the SDK:

cat tina-d1-h.tar.bz2.* | tar -zxv

Compile and package:

source build/envsetup.sh
lunch
make -j$(nproc)
pack

Flashing Image

Use dd to flash the image to the SD card:

sudo dd if=tina_d1-h.img of=/dev/your/device bs=1M status=progress

Logging into the System

Log into the system via the serial port.

Expected Results

The system should boot normally and allow login via the onboard serial port.

Actual Results

CFT

Boot Log

Screen recording (From flashing image to login):

Test Criteria

Successful: The actual result matches the expected result.

Failed: The actual result does not match the expected result.

Test Conclusion

CFT