OpenWrt 23.05.2 DongshanPI-Nezha STU Test Report

Test Environment

Operating System Information

• Download Link (OpenWrt Firmware Selector): https://firmware-selector.openwrt.org/?version=SNAPSHOT&target=d1%2Fgeneric&id=dongshan_nezha_stu
• Reference Installation Document: https://openwrt.org/docs/techref/hardware/soc/soc.allwinner.d1

The OpenWrt Firmware Selector allows you to custom build a system image online with the pre-installed packages you need. For this test, we used the original image without any modifications.

Hardware Information

• DongshanPI-Nezha STU
• A USB-A power supply
• A USB-A to C cable
• A microSD card
• A USB to UART debugger (e.g., CH340, CH341, FT2232, etc.)
• Three Dupont wires

Installation Steps

Flash Image to microSD Card

Use dd to flash the image to the microSD card.

gzip -kd openwrt-d1-generic-dongshan_nezha_stu-ext4-sdcard.img.gz
sudo dd if=openwrt-d1-generic-dongshan_nezha_stu-ext4-sdcard.img of=/dev/your/device bs=1M status=progress

Logging into the System

Logging into the system via the serial port.

Expected Results

The system should boot normally and allow login through the onboard serial port.

Actual Results

CFT

Boot Log

Screen recording (from flashing the image to system login):

Test Criteria

Successful: The actual result matches the expected result.

Failed: The actual result does not match the expected result.

Test Conclusion

CFT