RT-Thread Nuclei DDR200T Test Report

Test Environment

Operating System Information

• Source Code Link: https://github.com/Community-PIO-CH32V/ch32-pio-projects
• Reference Documents:
  • PlatformIO Core: https://docs.platformio.org/en/latest/core/installation/index.html
  • PlatformIO ch32v: https://pio-ch32v.readthedocs.io/en/latest/installation.html

Hardware Information

• Nuclei DDR200T Development Board

Installation Steps

Installing PlatformIO Core

First, check if your package manager includes a package like platformio-core. If not, you can use the installation script:

curl -fsSL -o get-platformio.py https://raw.githubusercontent.com/platformio/platformio-core-installer/master/get-platformio.py
python3 get-platformio.py

Configuring the PlatformIO Environment

Install the Nuclei development environment:

pio pkg install --global --platform "nuclei/nuclei@^1.0.11"

Add udev rules and apply them (the GROUP might need to be adjusted depending on the distribution):

curl -fsSL https://raw.githubusercontent.com/platformio/platformio-core/develop/platformio/assets/system/99-platformio-udev.rules | sudo tee /etc/udev/rules.d/99-platformio-udev.rules
cat << EOF | sudo tee -a /etc/udev/rules.d/99-platformio-udev.rules
SUBSYSTEM=="usb", ATTR{idVendor}="1a86", ATTR{idProduct}=="8010", GROUP="plugdev"
SUBSYSTEM=="usb", ATTR{idVendor}="4348", ATTR{idProduct}=="55e0", GROUP="plugdev"
SUBSYSTEM=="usb", ATTR{idVendor}="1a86", ATTR{idProduct}=="8012", GROUP="plugdev"
EOF
sudo udevadm control --reload-rules
sudo udevadm trigger

Add user group:

• Debian-based:

sudo usermod -a -G dialout $USER
sudo usermod -a -G plugdev $USER

• Arch-based:

sudo usermod -a -G uucp $USER
sudo usermod -a -G lock $USER

Preparing the Project Repository

Clone the relevant repository:

git clone https://github.com/Nuclei-Software/platform-nuclei.git

Compiling the Code

Compile the code using pio:

cd cd platform-nuclei/examples/rtthread_demo
pio run

Flashing the Image

Once the WCH-Link(E) is connected to the SWD debugging port, use pio to flash the image:

pio run --target upload

pio will automatically detect the development board. If flashing is unsuccessful, you can try specifying it manually:

pio run -e hbird_eval --target upload

Logging into the System

Connect to the board via the serial port.

Expected Results

The system should boot normally and information should be viewable through the onboard serial port.

Actual Results

CFT

Boot Log

Screen recording (from compilation to startup):

Test Criteria

Successful: The actual result matches the expected result.

Failed: The actual result does not match the expected result.

Test Conclusion

CFT