Melis 100ASK-V853-PRO Test Report

Test Environment

System Information

• Image Link: https://bbs.aw-ol.com/assets/uploads/files/1657169725953-e6e69a0f-5837-4840-99fe-8bc62c7abbf2-tina_v853-vision_uart0.img
• Reference Installation Document: https://v853.docs.aw-ol.com/

Hardware Information

• 100ASK-V853-PRO Development Board

Installation Steps

Flashing Image (SD Card)

Flash the image to an SD card:

dd if=1657169725953-e6e69a0f-5837-4840-99fe-8bc62c7abbf2-tina_v853-vision_uart0.img of=/dev/your/device bs=1M status=progress

Insert the card into the device and boot it up.

Flashing Image (Onboard EMMC)

Use LiveSuit software, select the image, and connect the development board for flashing.

For LiveSuit setup, refer to: https://linux-sunxi.org/LiveSuit

LiveSuit

Download and build:

git clone https://github.com/linux-sunxi/sunxi-livesuite.git
apt-get install dkms
make
# If you are getting error that /lib/modules/4.4.50+/build is missing,
# try adding symlink to the /usr/src/linux-headers-XXX, for example:
# sudo ln -s /usr/src/linux-headers-3.6-trunk-rpi/ /lib/modules/4.4.50+/build

cp awusb.ko /lib/modules/`uname -r`/kernel/
depmod -a
modprobe awusb
KERNEL=="aw_efex[0-9]*", MODE="0666"
udevadm control --reload-rules

To run:

./LiveSuit.sh

Logging into the System

Connect to UART3 to view serial output.

Expected Results

System should boot up normally, with output visible through the serial port.

Actual Results

CFT

Boot Log

Screen recording:

Test Criteria

Successful: The actual result matches the expected result.

Failed: The actual result does not match the expected result.

Test Conclusion

CFT